Stein 5:1 Hauler Kit

Stein 5:1 Hauler Kit – Complete 5:1 hauling system for arborists

The Stein 5:1 Hauler Kit, also known as Block & Tackle or Fiddle Block, comes fully assembled in a practical STEIN rope bag – ready for immediate use in tree pulling, lifting, and rigging in arboriculture. A powerful and reliable tool that provides a 5:1 mechanical advantage for efficient handling of heavy loads.

Features

• Fully assembled 5:1 hauling system with splicing for easy and quick use.
• 25 meters of STEIN OMEGA 12 mm (or 13 mm according to some sources) rigging rope with high breaking strength – perfect for demanding arborist operations.
• Two robust double pulleys with high load ratings (50 kN each, specific models ISC RP064 or KH212SS1/KH219SS1).
• Locking mechanism with STEIN Copious (Cool) sling tied in a Michigan Hitch or Michoacan Hitch for secure progress capture.
• Supplied in a STEIN rope bag for convenient transport and storage at the work site.
• Manufactured in the UK (GB) with high quality for professional use.

Technical Specifications

• System Type: 5:1 Hauler Kit (Block & Tackle / Fiddle Block)
• Rope: STEIN OMEGA 12–13 mm, 25 m (approx. 75 ft), breaking strength approx. 4300 kg (some sources state 2722–9400 lbs depending on specification)
• Pulleys: Two double pulleys, 50 kN (ISC RP064); alternatively ISC KH212SS1 (40 kN) + KH219SS1 (70 kN)
• Locking: STEIN Copious Cool sling in Michigan/Michoacan Hitch
• Article Number: SS-8160110025
• Country of Manufacture: United Kingdom (GB)
• Components: Rope bag included

WARNING

Activities using this type of equipment are inherently dangerous. It is not possible to cover every eventuality related to the use of this equipment. Purchasers and users of these products should seek professional training from a qualified and competent instructor before commencing any activity (Approved Tree Rigging & Dismantling Unit recommended). If you are unable or unwilling to take this responsibility, do not use the product. The manufacturer, its distributors and retailers accept no liability for inappropriate use.

It is your responsibility to ensure that all components match equally with their Working Load Limit (WLL) or Safety Factor (SF) or Safe Working Load (SWL). If you are unsure of the individual specifications of a product, contact the manufacturer. You must never exceed the lowest rated section or component in a rigging system. When calculating rigging systems, the strength of anchor points and attachment points must also be considered.

Poor technique and shock loading can cause catastrophic failure and should be avoided. Where a foreseeable failure may occur, an appropriate backup system must be installed and used. All components of the system used with this product must be inspected before and after each operation.